인덱스티엠_센서응용 Data Logger 전문회사

DT9824

The DT9841 is a real-time USB data acquisition module with embedded DSP for high-accuracy sound and vibration testing. It features full data acquisition capability: eight 24-bit analog inputs, two 24-bit analog outputs, 24 lines of digital I/O, and three 32-bit counter timers.

Key Features:

VOLTAGE INPUTS
•4, simultaneous, 24-bit analog input channels
•ISO-Channel technology provides ±500 V galvanic isolation channel-to-channel for all analog input signals and to the host computer ...guarantees noise immunity
•Input gains of 1, 8, 16, and 32 with input ranges of ±10 V to support the following effective ranges: ±10 V, ±1.25 V, ±0.625 V, ±0.3125 V
...allows maximum flexibility for any signal input
ADVANCED SAMPLING MODES
•Sampling frequency up to 4800Hz
•Continuously paced analog input operations
•Software-programmable trigger type (software or external digital trigger) to start analog input operations
•Channel Gain list allows measurement of any combination of channels/gains
ISOLATED DIGITAL I/O
•8 opto-isolated digital input lines
•8 opto-isolated digital output lines; the outputs are solid-state relays that operate from ±30 V at currents up to 400 mA (peak) AC or DC data stream for correlating analog and digital measurements
•Digital I/O galvanically isolated to 250 V
•Read the digital input port through the analog input

Item

Description


DT9824		High Accuracy USB DAQ Module


DT9824-OEM		High Accuracy USB DAQ Module, board-level (OEM) version

Accessories


EP333		Shielded cable (2m) with 37-pin connectors. Used to connect a DAQ module or accessory panel to an STP37 screw terminal panel.


EP379		Dual-Rack Mount Kit


EP380		Single-Rack Mount Kit


STP37		Screw terminal panel for connecting I/O signals. Requires EP333 cable to connect STP37 with DAQ module or accessory panel.