•Simultaneous A/D operation with sampling rates up to 2.0 MHz per channel •All subsystems operate synchronously at 48 MHz. •2 or 4 analog inputs, 2 waveform analog outputs, 16 digital inputs, 16 digital outputs, 2 32-bit counter timers, and 3 quadrature decoders. •16-bit deglitched DAC’s run at 500 kS/s per channel for waveform generation. •True USB 2.0 host interface for transferring data at rates up to 480 Mbits/second. •500 V isolation provides low-noise measurements and protects PC. •Ships with DT-Open Layers device drives, Ready-to- measure applications, Measure Foundry evaluation, and much more.
DT9832
The DT9832 is a series of high-speed, high performance USB data acquisition modules that provide simultaneous analog input operation at up to 2.0 MHz per channel. Each analog input has its own A/D converter to eliminate phase shift between channels and to allow you to correlate measurements at the exact same instant in time. Additionally, all functions of the module (A/D, D/A, DIO, C/T, Q/D) can be triggered simultaneously and the data streamed synchronously to host memory. Each USB DAQ module also features 3 quadrature decoders for measuring absolute and relative position and for detecting rotational speed.
Key Features:
-Simultaneous A/D operation with sampling rates up to 2.0 MHz per channel -All subsystems operate synchronously at 48 MHz. -2 or 4 analog inputs, 2 waveform analog outputs, 16 digital inputs, 16 digital outputs, 2 32-bit counter timers, and 3 quadrature decoders. -16-bit deglitched DAC’s run at 500 kS/s per channel for waveform generation. -True USB 2.0 host interface for transferring data at rates up to 480 Mbits/second. -500 V isolation provides low-noise measurements and protects PC. -Ships with DT-Open Layers device drives, Ready-to- measure applications, Measure Foundry evaluation, and much more.
Item
Description
DT9832-04-0-BNC
USB DAQ Module; 4 AI, 32 DIO, 2 C/T, 3 Q/D
DT9832-04-0-OEM
USB DAQ Module; 4 AI, 32 DIO, 2 C/T, 3 Q/D, board-only (OEM) version
DT9832-04-2-BNC
USB DAQ Module; 4 AI, 2 AO, 32 DIO, 2 C/T, 3 Q/D
DT9832-04-2-OEM
USB DAQ Module; 4 AI, 2 AO, 32 DIO, 2 C/T, 3 Q/D, board-only (OEM) version
DT9832A-02-0-BNC
USB DAQ Module; 2 AI, 32 DIO, 2 C/T, 3 Q/D
DT9832A-02-0-OEM
USB DAQ Module; 2 AI, 2 AO, 32 DIO, 2 C/T, 3 Q/D
DT9832A-02-2-BNC
USB DAQ Module; 2 AI, 2 AO, 32 DIO, 2 C/T, 3 Q/D
DT9832A-02-2-OEM
USB DAQ Module; 2 AI, 2 AO, 32 DIO, 2 C/T, 3 Q/D, board-only (OEM) version
Instant Delivery
Products available for Instant Delivery are in-stock and ready-to-ship. Instant Delivery is available for online orders only. Order quantities for Instant Delivery is limited to two pieces.
DT9832-04-2-BNC
USB DAQ Module; 4 AI, 2 AO, 32 DIO, 2 C/T, 3 Q/D
DT9832A-02-2-BNC
USB DAQ Module; 2 AI, 2 AO, 32 DIO, 2 C/T, 3 Q/D
Accessories
BNC DIN RAIL KIT
DIN Rail Mounting Kit for USB DAQ modules with BNC enclosure.
EP333
Shielded cable (2m) with 37-pin connectors. Used to connect a DAQ module or accessory panel to an STP37 screw terminal panel.
EP353
Accessory panel. Provides one 37-pin connector and one 26-pin connector for attaching analog input signals.
EP355
Accessory panel for attaching analog I/O and digital I/O signals. For OEM configurations only.
EP356
Accessory panel. Provides two 37-pin connectors for attaching analog output, counter/timer, trigger, clock signals, or digital I/O signals.
EP360
2-meter shielded cable with two 37-pin connectors. Used to connect an EP353 accessory panel to an STP37 screw terminal panel.
EP361
+5V power supply. Required for OEM configurations. Power supply is included with BNC and STP configurations.
STP37
Screw terminal panel for connecting I/O signals. Requires EP333 cable to connect STP37 with DAQ module or accessory panel.
DT9832-04-0
DT9832-04-2
DT9832A-02-0
DT9832A-02-2
Analog Input Features
Channels
4SE
2SE
Throughput
1.25MHz* per channel
2.0MHz* per channel
Resolution
16-bit
Input Range
±10V
A/D Type
SAR
Analog Output Features
Channels
-
2
-
2
Throughput
-
500kHz* Waveform
-
500kHz* Waveform
Resolution
-
16-bit
-
16-bit
Output Range
-
±10V
-
±10V
Special Features
Isolation
500V
Digital I/O
16 in, 16 out*
Counter/Timer
2*
Quad Decoder
3*
Power
+5V
Available Packaging
BNC, OEM
*All functions synchronized for high speed.
Measure Foundry®
Measure Foundry is an open, powerful application builder for test and measurement systems. Easily and quickly create complex applications without writing code.
Measurement Applets Measurement Applets
Measurement Applets are small applications created with Measure Foundry that can be modified or combined to provide a specific solution. The objective is to provide an avenue for our customers to quickly and easily design their own applications.
quickDAQ quickDAQ
A ready-to-measure application for data acquisition. quickDAQ is a high performance .NET based data collection and analysis software application that allows you to acquire analog data, plot it during acquisition, analyze it, and save it to disk for later analysis.
GO! Application
The GO! application for ECONseries data acquisition modules provides eight mini-intruments in one easy-to-navigate application.
LV-Link
Lets you use Data Translation's USB and PCI data acquisition boards with National Instruments' LabVIEW®
DAQ Adaptor for MATLAB
Access the powerful visualization and analysis capabilities of MATLAB® with any Data Translation PCI or USB board or module. Data Translation's DAQ Adapter provides and interface between the MATLAB Data Acquisition (DAQ) subsystem from The MathWorks and Data Translation's DT-Open Layers architecture.
DT-Open Layers for .NET DT-Open Layers® for .NET
DT-Open Layers for .NET is a simple to use, yet powerful native .NET class library for developing test and measurement applications in Microsoft Visual Studio®.
The following accessories are available for this product:
BNC DIN RAIL KIT
Kit for mounting USB modules in BNC enclosure to a DIN rail. Includes mounting clips, screws, and instructions. Rail not included.
EP333
2-meter shielded cable with two 37-pin connectors. Used to connect to an STP37 screw terminal panel.
EP353
Accessory panel. Provides one 37-pin connector and one 26-pin connector for attaching analog input signals.
EP355
Accessory panel for attaching analog I/O and digital I/O signals. For OEM configurations only.
EP356
Accessory panel. Provides two 37-pin connectors for attaching analog output, counter/timer, trigger, clock signals, or digital I/O signals.
EP360
2-meter shielded cable with two 37-pin connectors. Used to connect an EP353 accessory panel to an STP37 screw terminal panel.
EP361
+5V power supply. Required for OEM configurations.
STP37
Screw terminal panel for connecting I/O signals from the EP353 or EP356 accessory panel.
상호: (주)인덱스티엠 I 주소: 16514, 경기도 수원시 영통구 법조로 25, 광교 SK VIEW Lake, A동 1602호 (내방객: 24층 회의실 사전예약) 사업자등록번호: 214-03-16174 I 대표자: 조인복 I 대표: 031-895-4370 Copyright @ 2000-2020 INDEXTM Corporation All Right Reserved 본 홈페이지의 무단복제를 불허함 INDEXTM Corporation A-1602, SK VIEW Lake Tower, 25, Beopjo-ro, Yeongtong-gu, Suwon-si, Gyeonggi-do, 16514, Korea.
