•150 kHz throughput on both the A/D and D/A with 16-bit resolution •Up to 32 single-ended or 16 differential analog input channels •Two deglitched analog outputs for smooth waveform generation •16 digital input/output lines that can be clocked synchronously with one bank of eight digital input lines that also support interrupt-on-change •Two 32-bit counter/timer channels that can be clocked synchronously at the analog input rate •500 volt galvanic isolation prevents ground loops, maximizes analog signal integrity, and protects your computer •Runs on USB power... no external power required •Flexible clocking and triggering •Flexible acquisition modes for input operations, and flexible output modes for output operations •BNC case available as an option
DT9818
The DT9818 is perfect for embedding in a custom application where isolation is required. The DT9818 is a high-performance USB data acquisition (DAQ) module that combines the functionality of multiple boards by providing simultaneous analog input and output, digital I/O, and counter/timer operations. Many software choices make application development easy, from ready-to-measure programs that ship with the board to full graphical programming with our Measure Foundry application builder.
Key Features:
•150 kHz throughput on both the A/D and D/A with 16-bit resolution •Up to 32 single-ended or 16 differential analog input channels •Two deglitched analog outputs for smooth waveform generation •16 digital input/output lines that can be clocked synchronously with one bank of eight digital input lines that also support interrupt-on-change •Two 32-bit counter/timer channels that can be clocked synchronously at the analog input rate •500 volt galvanic isolation prevents ground loops, maximizes analog signal integrity, and protects your computer •Runs on USB power... no external power required •Flexible clocking and triggering •Flexible acquisition modes for input operations, and flexible output modes for output operations •BNC case available as an option
Item
Description
DT9818-OEM
Multifunction USB DAQ Module; board-level OEM version. OEM quantity pricing available. Quantities of 100 at $895. Contact sales for more information.
DT9818-8DI-BNC
Multifunction USB DAQ Module; BNC version
DT9818-16SE-BNC
Multifunction USB DAQ Module; BNC version
DT9818-32-OEM
Multifunction USB DAQ Module; 32SE/16DI channels; board-level OEM version.
DT9818-32-STP
Multifunction USB DAQ Module; 32SE/16DI channels; STP version
Accessories
EP333
Shielded cable (2m) with 37-pin connectors. Used to connect a DAQ module or accessory panel to an STP37 screw terminal panel.
EP353
Accessory panel. Provides one 37-pin connector and one 26-pin connector for attaching analog input signals.
EP355
Accessory panel for attaching analog I/O and digital I/O signals. For OEM configurations only.
EP356
Accessory panel. Provides two 37-pin connectors for attaching analog output, counter/timer, trigger, clock signals, or digital I/O signals.
EP360
2-meter shielded cable with two 37-pin connectors. Used to connect an EP353 accessory panel to an STP37 screw terminal panel.
STP37
Screw terminal panel for connecting I/O signals. Requires EP333 cable to connect STP37 with DAQ module or accessory panel.
Measure Foundry®
Measure Foundry is an open, powerful application builder for test and measurement systems. Easily and quickly create complex applications without writing code.
Measurement Applets Measurement Applets
Measurement Applets are small applications created with Measure Foundry that can be modified or combined to provide a specific solution. The objective is to provide an avenue for our customers to quickly and easily design their own applications.
quickDAQ quickDAQ
A ready-to-measure application for data acquisition. quickDAQ is a high performance .NET based data collection and analysis software application that allows you to acquire analog data, plot it during acquisition, analyze it, and save it to disk for later analysis.
GO! Application
The GO! application for ECONseries data acquisition modules provides eight mini-intruments in one easy-to-navigate application.
LV-Link
Lets you use Data Translation's USB and PCI data acquisition boards with National Instruments' LabVIEW®
DAQ Adaptor for MATLAB
Access the powerful visualization and analysis capabilities of MATLAB® with any Data Translation PCI or USB board or module. Data Translation's DAQ Adapter provides and interface between the MATLAB Data Acquisition (DAQ) subsystem from The MathWorks and Data Translation's DT-Open Layers architecture.
DT-Open Layers for .NET DT-Open Layers® for .NET
DT-Open Layers for .NET is a simple to use, yet powerful native .NET class library for developing test and measurement applications in Microsoft Visual Studio®.
The following accessories are available for this product:
EP333
2-meter shielded cable with two 37-pin connectors. Used to connect to an STP37 screw terminal panel.
EP353
Accessory panel. Provides one 37-pin connector and one 26-pin connector for attaching analog input signals.
EP355
Accessory panel for attaching analog I/O and digital I/O signals. For OEM configurations only.
EP356
Accessory panel. Provides two 37-pin connectors for attaching analog output, counter/timer, trigger, clock signals, or digital I/O signals.
EP360
2-meter shielded cable with two 37-pin connectors. Used to connect an EP353 accessory panel to an STP37 screw terminal panel.
STP37
Screw terminal panel for connecting I/O signals from the EP353 or EP356 accessory panel.
상호: (주)인덱스티엠 I 주소: 16514, 경기도 수원시 영통구 법조로 25, 광교 SK VIEW Lake, A동 1602호 (내방객: 24층 회의실 사전예약) 사업자등록번호: 214-03-16174 I 대표자: 조인복 I 대표: 031-895-4370 Copyright @ 2000-2020 INDEXTM Corporation All Right Reserved 본 홈페이지의 무단복제를 불허함 INDEXTM Corporation A-1602, SK VIEW Lake Tower, 25, Beopjo-ro, Yeongtong-gu, Suwon-si, Gyeonggi-do, 16514, Korea.
