•4IEPE채널,24비트 해상도,최대102.4KS/ s의/채널 • 디지털I /O,카운터 /타이머,타코미터 •24비트, 다이나믹 파형 생성을 위한아날로그 출력 • TI의 AM335xSDK필수버전7.0을 사용한 오픈 소스리눅스컴퓨팅플랫폼 •호스트통신을위한이더넷 및USB클라이언트 •다양한예제 프로그램, 무료소스 코드제공
DT7837 Dynamic Signal Analyzer with Embedded ARM
The DT7837 is a high accuracy dynamic signal acquisition module for noise, vibration, and acoustic measurements with an embedded Cortex-A8 1GHz ARM processor. Four, 24-bit, IEPE (ICP®) sensor input data can be algorithmically processed in real time with the optional use of a 24-bit stimulus D/A generator and the results presented to a host for analysis. Complete source code is provided that can be modified and used without any restrictions. Further examples show how to develop an embedded application for any specific purpose using various open-source libraries and utilities.
Key Features:
4 IEPE channels, 24-bit resolution, up to 102.4 kHz simultaneous sampling
Digital I/O (8 In/8 Out), Counter/Timers, Tachometer
High speed, 24-bit, stimulus analog output for dynamic waveform generation
TI AM335x ARM Cortex-A8 MPU with 2GB on-board NAND Flash memory
Open-source Linux computing platform using the TI AM335x SDK Essentials Version 7.0
SD-Card interface for measurement results and raw data
USB-host port for additional SSD hard disk, Wireless LAN, or GSM communication stick
RS232 (3.3V) serial interface to communicate with PLC
Ethernet and USB client for host communication
Numerous example programs and free source code provided
This file is a self-extracting compressed archive that will install the source code for the DT78xx kernel device drivers, device tree, and examples under the --target directory on your Linux host computer when executed. Before executing this file, refer to the DT7837 Getting Started help file for detailed instructions on setting up a host for development. [Release Notes]
If you need to update the FPGA or NAND flash of your module or in the unlikely event that the NAND flash of the DT7837 module gets corrupted, this file can be copied to an SD card for use by the DT7837 module. Refer to the DT7837 Getting Started help file for detailed instructions on updating the FPGA and/or restoring the NAND flash using this file.
상호: (주)인덱스티엠 I 주소: 16514, 경기도 수원시 영통구 법조로 25, 광교 SK VIEW Lake, A동 1602호 (내방객: 24층 회의실 사전예약) 사업자등록번호: 214-03-16174 I 대표자: 조인복 I 대표: 031-895-4370 Copyright @ 2000-2020 INDEXTM Corporation All Right Reserved 본 홈페이지의 무단복제를 불허함 INDEXTM Corporation A-1602, SK VIEW Lake Tower, 25, Beopjo-ro, Yeongtong-gu, Suwon-si, Gyeonggi-do, 16514, Korea.
The DT7837 is a high accuracy dynamic signal acquisition module for noise, vibration, and acoustic measurements with an embedded Cortex-A8 1GHz ARM processor. Four, 24-bit, IEPE (ICP®) sensor input data can be algorithmically processed in real time with the optional use of a 24-bit stimulus D/A generator and the results presented to a host for analysis. Complete source code is provided that can be modified and used without any restrictions. Further examples show how to develop an embedded application for any specific purpose using various open-source libraries and utilities.
