Function/signal generators generally provide signals with a small amplitude into 50-Ohm systems.
Signal conditioning and amplification are therefore required in many technical areas.
The TOE 7608 broadband amplifier is suitable as a non-inverting power output stage for the amplification of such signal sources. Each generator with an output voltage of 20 Vpp is able to cover the full operating range of the TOE 7608 S amplifier. The power is 115 Vrated into 400 Ohm at a max. output amplitude. The bandwidth is 15 Hz up to 20 kHz.
Overcurrent protection at the output, protection against feedback voltages, and overtemperature protection provide the amplifier with a high degree of operational safety. Other output voltages (e.g. 230 Vrms) or frequency ranges are available on request.
Technical data
Amplifier data TOE7608S
Frequency range
15 Hz to 20 kHz (-3 dB)
Gain
Non-inverting, fixed at + 25,6 dB, with input impedance > 10 kOhm, + 31,6 dB, with input impedance 50 Ohm
Input impedance
AC coupling
> 10 kOhm (pass band)
DC coupling
> 10 kOhm or 50 Ohm, selectable
Permissible input
max. 10 Vrms, continuous
Output impedance
Approx. 70 Ohm, short-circuit proof
Output voltage
max. 115 Veff into 400 Ohm load
Output noise
< 5 mVrms with short-circuited input
Distortion factor
< 0,5 % at Vout < 100 Vrms into 400 Ohm load in frequency range 50 Hz bis 20 kHz
Feedback voltage protection
Fused by F 0,5 AC in accordance with DIN 41661, IEC 127-2/11
Order informations + Options
Broadband amplifier
TOE 7608 S
Options
TOE 9508
Carrying handle
TOE 9501
19¡° adapter, 3 HU
TOE 9503
19" rack module, 4 HU
»óÈ£: (ÁÖ)À妽ºÆ¼¿¥ I ÁÖ¼Ò: 16514, °æ±âµµ ¼ö¿ø½Ã ¿µÅ뱸 ¹ýÁ¶·Î 25, ±¤±³ SK VIEW Lake, Aµ¿ 1602È£ (³»¹æ°´: 24Ãþ ȸÀÇ½Ç »çÀü¿¹¾à) »ç¾÷ÀÚµî·Ï¹øÈ£: 214-03-16174 I ´ëÇ¥ÀÚ: Á¶Àκ¹ I ´ëÇ¥: 031-895-4370 Copyright @ 2000-2020 INDEXTM Corporation All Right Reserved º» ȨÆäÀÌÁöÀÇ ¹«´Üº¹Á¦¸¦ ºÒÇãÇÔ INDEXTM Corporation A-1602, SK VIEW Lake Tower, 25, Beopjo-ro, Yeongtong-gu, Suwon-si, Gyeonggi-do, 16514, Korea.