UPM309 3상 판넬 전력미터

  • DIN 96x96 멀티펑션 3상 전력미터

Highlights
  • DIN 96x96 ultra compact version, only 39 mm depth
  • Fully bi-directional four quadrants measurements for all energies and powers
  • Main electrical parameters measured and displayed for a cost-effective consumption analysis
  • Version for 1 or 5A CT and for direct connection up to 6A
  • Possibility to connect by PT
  • Up to 8 MB for data recording (ENH version)
  • Possibility to record all energy counters (ENH version)
  • Up to 24 parameters selectable among real time measurements for MIN/AVG/MAX recording (ENH version)
  • MODBUS RTU/ASCII communication by RS485 port or MODBUS TCP communication by Ethernet port
  • Possibility to manage the instrument in remote mode by WintoolNET software or by Web server interface
  • 2 digital outputs, 1 digital input, 1 analog output (optional)

    Applications
    • Energy audit.
    • Monitoring system and energy control.
    • Individual machine load monitoring.
    • Power peak control.
    • Switchboards, gensets, motor control centers, etc.
    • Remote metering and cost allocation.

      Available Configurations
          Basic ENH
      CURRENT INPUTS For 1/5A CT
      AUXILIARY POWER SUPPLY
      (make one choice only)
      115 VAC ±15% (only for instrument with RS485 port)
      230 VAC ±15% (only for instrument with RS485 port)
      85...265 VAC (only for instrument with Ethernet port)  
      COMMUNICATION PORT
      (make one choice only)
      RS485 for MODBUS RTU/ASCII communication
      Ethernet for HTTP, MODBUS TCP communication  
      INSTRUMENT REMOTE MANAGEMENT WintoolNET
      Web server (only for instrument with Ethernet port)  
      SIGN REPRESENTATION IN MODBUS PROTOCOL
      (make one choice only)
      Sign bit
      2's complement
      2 DIGITAL OUTPUTS For alarm events or pulse emissions
      ANALOG OUTPUT (only for instrument with RS485 port) 0...20 / 4...20 mADC, programmable  
      DIGITAL INPUT To synchronise the DMD value calculation
      DMD VALUE CALCULATION MODE Digital input synchronisation or Fixed window  
      Digital input synchronisation, Fixed or Sliding window  
      MEMORY 1 MB  
      8 MB  
      RECORDINGS Active and reactive power AVG values  
      Real time params MIN/AVG/MAX values (up to 24 params programmable)  
      Energy counters  
      WIRING MODES Three phase, 4 wires, 3 currents (3.4.3)
      Three phase, 3 wires, 2 currents (3.3.2)
      Single phase (1ph)
      THD & HARMONICS Voltage and current THD values
      Voltage and current harmonics up to 15th
      APPARENT ENERGY COUNTERS
      (make one choice only)
      Total counters
      Separated Inductive&Capacitive counters


      Legend
      = standard
      = optional

      Specifications
      Power supply
      Voltage range (according to the model): Instrument with RS485 port: 230 VAC ±15% or 115 VAC ±15% on request
      Instrument with Ethernet port: 85...265 VAC
      Frequency: 50/60 Hz

      Voltage inputs

      Maximum measurable voltage: 600 VAC max L-L
      Minimum voltage for FFT calculation: 20/35 VAC (multiplied by PT ratio in case of PT use) with direct connection
      Input impedance: ›1.3 MOhm
      Frequency: 45 - 65 Hz


      Current inputs

      Maximum value: 7 A
      Starting current (Ist): 2 mA
      CT burden: max 0.15 VA per phase
      Minimum current for FFT calculation: 100 mA * CT ratio


      Typical accuracy
      Voltage: ±0.2% reading in 10% FS...FS range (FS=Full Scale value)
      Current: ±0.4% reading in 5% FS...FS range
      Power: ±0.5% reading ±0.1% FS (PF=1)
      Frequency: ±0.1% reading ±1 digit in 45...65 Hz range
      Active energy: Class 1 according to IEC/EN 62053-21
      Reactive energy: Class 2 according to IEC/EN 62053-23

      Display & keyboard
      Display: Backlighted LCD, 78x61 mm
      3 rows, 4 digits + symbols
      Keyboard: 4 front buttons

      Communication ports
      Type: RS485 optoisolated or Ethernet
      Protocols: MODBUS RTU/ASCII in case of RS485 port
      HTTP, NTP, DHCP, MODBUS TCP in case of Ethernet port
      Baud rate: 300 a 57600 bps in case of RS485 port
      10/100 Mbps in case of Ethernet port

      2 DIGITAL OUTPUTS (DO)
      Type: NPN or PNP, passive optoisolated
      Maximum values (according to IEC/EN 62053-31): 27 VDC - 27 mA
      Energy pulse length (only for DO in pulse mode): 50 ±2ms ON time
      Max output reaction time (only for DO in alarm mode): 1 s

      ANALOG OUTPUT (AO)
      Type: Active optoisolated
      Selectable ranges: 0...20 / 4...20 mADC
      Maximum load: 500 Ω

      DIGITAL INPUT (DI)
      Type: Optoisolated
      Voltage range: 80 ... 265 VCA-CC

      Wire diameter for terminals
      Measuring terminals (A&V): 2.5 mm2 / 14 AWG
      Terminals for I/O, AUX, RS485 port: 1.5 mm2 / 16 AWG

      Size & weight
      LxHxP, W: 96x96x39 mm, max 310 g

      Environmental conditions
      Operating temperature: -25 °C ... +55 °C (3K6)
      Storage temperature: -25 °C ... +75 °C (2K3)
      Max humidity (without condensation): 80%
      Sinusoidal vibration amplitude: 50 Hz ±0.075 mm
      Protection degree - frontal part: IP54 (granted only in case of installation in a cabinet with at least IP54 protection degree)
      Protection degree - terminals: IP20
      Pollution degree: 2
      Installation and use: Internal

      Standard compliance (for the parts applicable for instrument)
      Directives: 2006/95/EC, 2004/108/EC
      Safety: EN 61010-1, EN 61010-2-030
      EMC: EN 61326-1, EN 55011, EN 61000-4-2, EN61000-4-3, EN61000-4-4,
      EN61000-4-5, EN61000-4-6, EN61000-4-11, EN61000-6-2

      Related products

      wintool Wintool WintoolNET
   



  상호:  (주)인덱스티엠 I 주소: 16514, 경기도 수원시 영통구 법조로 25, 광교 SK VIEW Lake, A동 1602호 (내방객: 24층 회의실 사전예약)
  사업자등록번호: 214-03-16174  I  대표자: 조인복  I  대표: 031-895-4370  
  Copyright @ 2000-2020 INDEXTM Corporation All Right Reserved
          본 홈페이지의 무단복제를 불허함
           INDEXTM Corporation  A-1602, SK VIEW Lake Tower, 25, Beopjo-ro, Yeongtong-gu, Suwon-si, Gyeonggi-do, 16514, Korea.