DT9841 – Up to 8 ch. 24-bit resolution, anti-aliasing filter, up to 100 kHz per channel sampling rate, 2 analog outputs
DT9842 – 8 channels, 16-bit resolution with up to 100 kHz per channel sampling rate and up to 8 analog outputs
DT9841
The DT9841 is a real-time USB data acquisition
module with embedded DSP for high-accuracy sound and vibration testing. It
features full data acquisition capability: eight 24-bit analog inputs, two
24-bit analog outputs, 24 lines of digital I/O, and three 32-bit counter timers.
Key Features:
- Delta-Sigma A/D and D/A converters for
high-accuracy measurements at up to 800 kS/s (aggregate) - Real-time control
with embedded TMS320C6713, 300 MHz DSP for stand-alone or system operation -
Software programmable DSP - Two packaging configurations: Sleek Box version
for easy connections or board-level version for OEM-embedded applications -
Flexible memory configuration: 128 MB SDRAM and 2 MB Flash for autonomous
operation - Scalable design for connecting up to 8 modules for high-channel
count applications - High-speed host USB 2.0 host interface (480
Mbits/seconds) - 500 V Isolation for maximizing signal integrity
Item
Description
DT9841
USB DAQ Module; Board-level version
DT9841-SB
USB DAQ Module; Sleek Box enclosure
Accessories
EP333
Shielded cable (2m) with 37-pin connectors. Used to connect a DAQ
module or accessory panel to an STP37 screw terminal panel.
EP342
0.1m shielded 50-pin cable for connecting multiple DT9837 or DT9840
Series modules together.
EP348
Optional +5V power supply with cable. Included with Sleek Box models.
EP353
Accessory panel. Provides one 37-pin connector and one 26-pin
connector for attaching analog input signals.
EP354
Adapter to convert serial output to standard RS-232.
EP356
Accessory panel. Provides two 37-pin connectors for attaching analog
output, counter/timer, trigger, clock signals, or digital I/O signals.
EP360
2-meter shielded cable with two 37-pin connectors. Used to connect an
EP353 accessory panel to an STP37 screw terminal panel.
STP37
Screw terminal panel for connecting I/O signals. Requires EP333 cable
to connect STP37 with DAQ module or accessory panel.
Feature
DT9841
DT9841E
DT9841-VIB
DT9842/2
DT9842/8
Analog Input Features
Channels
8DI
2DI
8SE
8SE
8SE
Throughput
100kHz* per channel
100kHz* per channel
100kHz* per channel
100kHz* per channel
100kHz* per channel
Resolution
24-bit
24-bit
24-bit
16-bit
16-bit
Input Range
±10V
±10V
±10V
±10V
±10V
A/D Type
Delta-Sigma with DSP
Delta-Sigma with DSP
Delta-Sigma with DSP
SAR with
DSP
SAR with
DSP
Analog Output Features
Channels
2
2
2
2
2
Throughput
100kHz* per channel
100kHz* per channel
100kHz* per channel
100kHz* per channel
100kHz* per channel
Resolution
24-bit
24-bit
24-bit
16-bit
16-bit
Output Range
±2.5V,
±10V
±2.5V,
±10V
±2.5V,
±10V
±10V
±10V
Special Features
Isolation
500V
500V
500V
500V
500V
Digital I/O
24*
24*
16*
24*
24*
Counter/Timer
3*
3*
3*
3*
3*
Tachometer
∨*
∨*
∨*
∨*
∨*
Power
+5V
+5V
+5V
+5V
+5V
Available
Packaging
OEM,
Sleek Box
OEM
Sleek
Box
OEM,
Sleek Box
OEM,
Sleek Box
*All functions synchronized for high
speed.
Included Software:
Each DT9840 series module includes a CD containing device drivers, an API
library for developing DSP programs, an API communications library for
developing host programs, the DT Dynamic Signal Analyzer application, example
programs, and a number of utility programs : everything you need to get up and
running with a DT9840 Series module.
- DT9840 Series DSP Library : The DT9840 Series DSP Library provides
I/O and communication functions that you can call from a DSP application program
on a DT9840 Series module using Code Composer Studio from Texas
Instruments. - DT9840 Series Host Communication Library : The DT9840
Series Host Communication Library provides functions that you can call from a
host application program using Microsoft Visual Studio to allow communication
between the host and a DT9840 Series module. - DT9840 Series Download
Utility : The DT9840 Series Download Utility allows you to download a DSP
program (that conforms to the Code Composer Studio standard) into the SDRAM of a
DT9840 Series module, run the DSP program, and perform memory and LED tests on
the module. - DT9840 Series Flash Programmer Utility : The DT9840
Series Flash Programmer Utility allows you to download a DSP program (that
conforms to the Code Composer Studio standard) into the flash memory of a DT9840
Series module. - Example programs are provided that illustrate how to
call the functions in the DT9840 Series Host Communication Library and DT9840
Series DSP Library. - DT9841 Calibration Utility : The DT9841
Calibration Utility allows you to calibrate the analog I/O circuitry of a DT9841
or DT9841E module.
Additional Software:
- The free Dynamic Signal Analyzer application allows you to perform
dynamic signal processing operations on a DT9840 Series module without
programming. - Measure Foundry allows you to stream data from the
DT9840 series module without using Visual Studio or Code Composer. Measure
Foundry allows you to build complex test and measurement applications easily
without writing code.
EP333
2-meter shielded cable with two 37-pin connectors. Used to connect to an
STP37 screw terminal panel.
EP342
0.1m shielded 50-pin cable for connecting multiple DT9837 or DT9840 Series
modules together.
EP348
Optional +5V power supply with cable. Included with Sleek Box enclosure.
EP353
Accessory panel. Provides one 37-pin connector and one 26-pin connector for
attaching analog input signals.
EP354
Adapter to convert serial output to standard RS-232.
EP356
Accessory panel. Provides two 37-pin connectors for attaching analog output,
counter/timer, trigger, clock signals, or digital I/O signals.
EP360
2-meter shielded cable with two 37-pin connectors. Used to connect an EP353
accessory panel to an STP37 screw terminal panel.
STP37
Screw terminal panel for connecting I/O signals from the EP353 or EP356
accessory panel.
Note: Some accessories are for Sleek Box models
only.
DT9841-VIB
The DT9841-VIB is a real-time USB data
acquisition module with an embedded DSP for high-accuracy accelerometer testing
for noise and vibration applications. It includes connections for IEPE sensors.
This DAQ module features full data acquisition capability: eight 24-bit analog
inputs, two 24-bit analog outputs, 16 lines of digital I/O, and three 32-bit
counter timers.
Key Features:
- Delta-Sigma A/D and D/A converters for
high-accuracy measurements at up to 800 kS/s (aggregate) - Real-time control
with embedded 300 MHz DSP for stand-alone or system operation - Software
programmable DSP - Sleek Box provides easy connections to IEPE sensors -
Flexible memory configuration: 128 MB SDRAM and 2 MB Flash for autonomous
operation - Scalable design for connecting up to 8 modules for high-channel
count applications - High-speed host USB 2.0 host interface (480
Mbits/seconds) - 500 V Isolation for maximizing signal integrity
Item
Description
DT9841-VIB-SB
USB DAQ Module for real-time signal capture and processing; Sleek Box
enclosure
Accessories
EP333
Shielded cable (2m) with 37-pin connectors. Used to connect a DAQ
module or accessory panel to an STP37 screw terminal panel.
EP342
0.1m shielded 50-pin cable for connecting multiple DT9837 or DT9840
Series modules together.
EP348
Optional +5V power supply with cable. Included with Sleek Box models.
EP353
Accessory panel. Provides one 37-pin connector and one 26-pin
connector for attaching analog input signals.
EP354
Adapter to convert serial output to standard RS-232.
EP356
Accessory panel. Provides two 37-pin connectors for attaching analog
output, counter/timer, trigger, clock signals, or digital I/O signals.
EP360
2-meter shielded cable with two 37-pin connectors. Used to connect an
EP353 accessory panel to an STP37 screw terminal panel.
STP37
Screw terminal panel for connecting I/O signals. Requires EP333 cable
to connect STP37 with DAQ module or accessory panel.
Feature
DT9841
DT9841E
DT9841-VIB
DT9842/2
DT9842/8
Analog Input Features
Channels
8DI
2DI
8SE
8SE
8SE
Throughput
100kHz* per channel
100kHz* per channel
100kHz* per channel
100kHz* per channel
100kHz* per channel
Resolution
24-bit
24-bit
24-bit
16-bit
16-bit
Input Range
±10V
±10V
±10V
±10V
±10V
A/D Type
Delta-Sigma with DSP
Delta-Sigma with DSP
Delta-Sigma with DSP
SAR with
DSP
SAR with
DSP
Analog Output Features
Channels
2
2
2
2
2
Throughput
100kHz* per channel
100kHz* per channel
100kHz* per channel
100kHz* per channel
100kHz* per channel
Resolution
24-bit
24-bit
24-bit
16-bit
16-bit
Output Range
±2.5V,
±10V
±2.5V,
±10V
±2.5V,
±10V
±10V
±10V
Special Features
Isolation
500V
500V
500V
500V
500V
Digital I/O
24*
24*
16*
24*
24*
Counter/Timer
3*
3*
3*
3*
3*
Tachometer
∨*
∨*
∨*
∨*
∨*
Power
+5V
+5V
+5V
+5V
+5V
Available
Packaging
OEM,
Sleek Box
OEM
Sleek
Box
OEM,
Sleek Box
OEM,
Sleek Box
*All functions synchronized for high
speed.
Included Software:
Each DT9840 series module includes a CD containing device drivers, an API
library for developing DSP programs, an API communications library for
developing host programs, the DT Dynamic Signal Analyzer application, example
programs, and a number of utility programs : everything you need to get up and
running with a DT9840 Series module.
- DT9840 Series DSP Library : The DT9840 Series DSP Library provides
I/O and communication functions that you can call from a DSP application program
on a DT9840 Series module using Code Composer Studio from Texas
Instruments. - DT9840 Series Host Communication Library : The DT9840
Series Host Communication Library provides functions that you can call from a
host application program using Microsoft Visual Studio to allow communication
between the host and a DT9840 Series module. - DT9840 Series Download
Utility : The DT9840 Series Download Utility allows you to download a DSP
program (that conforms to the Code Composer Studio standard) into the SDRAM of a
DT9840 Series module, run the DSP program, and perform memory and LED tests on
the module. - DT9840 Series Flash Programmer Utility : The DT9840
Series Flash Programmer Utility allows you to download a DSP program (that
conforms to the Code Composer Studio standard) into the flash memory of a DT9840
Series module. - Example programs are provided that illustrate how to
call the functions in the DT9840 Series Host Communication Library and DT9840
Series DSP Library. - DT9841 Calibration Utility : The DT9841
Calibration Utility allows you to calibrate the analog I/O circuitry of a DT9841
or DT9841E module.
Additional Software:
- The free Dynamic Signal Analyzer application allows you to perform
dynamic signal processing operations on a DT9840 Series module without
programming. - Measure Foundry allows you to stream data from the
DT9840 series module without using Visual Studio or Code Composer. Measure
Foundry allows you to build complex test and measurement applications easily
without writing code.
Compatible Third Party Software:
Vibrant Technology's ME'scope
ME'scopeVES is a series of software packages designed to make it easier for
you to observe and analyze a variety of noise & vibration problems in
machinery and structures. ME'scopeVES is used for operating deflection shape
(ODS) analysis, modal analysis, acoustic analysis, MIMO modeling &
simulation, and structural modifications.
EP333
2-meter shielded cable with two 37-pin connectors. Used to connect to an
STP37 screw terminal panel.
EP342
0.1m shielded 50-pin cable for connecting multiple DT9837 or DT9840 Series
modules together.
EP353
Accessory panel. Provides one 37-pin connector and one 26-pin connector for
attaching analog input signals.
EP354
Adapter to convert serial output to standard RS-232.
EP356
Accessory panel. Provides two 37-pin connectors for attaching analog output,
counter/timer, trigger, clock signals, or digital I/O signals.
EP360
2-meter shielded cable with two 37-pin connectors. Used to connect an EP353
accessory panel to an STP37 screw terminal panel.
STP37
Screw terminal panel for connecting I/O signals from the EP353 or EP356
accessory panel.
Note: Some accessories are for Sleek Box models
only.
DT9841E
The DT9841E is a low cost, real-time USB data
acquisition module with embedded DSP for high-accuracy sound and vibration
testing. This DAQ module features full data acquisition capability: two 24-bit
analog inputs, two 24-bit analog outputs, 24 lines of digital I/O, and three
32-bit counter timers.
Key Features:
- Delta-Sigma A/D and D/A converters for
high-accuracy measurements at up to 200 kS/s (aggregate) - Real-time control
with embedded TMS320C6713, 300 MHz DSP for stand-alone or system operation -
Software programmable DSP - Flexible memory configuration: 128 MB SDRAM and 2
MB Flash for autonomous operation - High-speed host USB 2.0 host interface
(480 Mbits/seconds) - 500 V Isolation for maximizing signal integrity
Item
Description
DT9841E
USB DAQ Module; Embedded DSP
DT9841E-DK
Developer Kit: Includes DT9841E module, EP358E accessory panel, EP344
cables, USB cable, and power supply
Accessories
EP333
Shielded cable (2m) with 37-pin connectors. Used to connect a DAQ
module or accessory panel to an STP37 screw terminal panel.
EP342
0.1m shielded 50-pin cable for connecting multiple DT9837 or DT9840
Series modules together.
EP348
Optional +5V power supply with cable. Included with Sleek Box models.
EP354
Adapter to convert serial output to standard RS-232.
EP358E
2
channel in, 2 channel out accessory panel for DT9841E; includes 2 EP344 cables.
Feature
DT9841
DT9841E
DT9841-VIB
DT9842/2
DT9842/8
Analog Input Features
Channels
8DI
2DI
8SE
8SE
8SE
Throughput
100kHz* per channel
100kHz* per channel
100kHz* per channel
100kHz* per channel
100kHz* per channel
Resolution
24-bit
24-bit
24-bit
16-bit
16-bit
Input Range
±10V
±10V
±10V
±10V
±10V
A/D Type
Delta-Sigma with DSP
Delta-Sigma with DSP
Delta-Sigma with DSP
SAR with
DSP
SAR with
DSP
Analog Output Features
Channels
2
2
2
2
2
Throughput
100kHz* per channel
100kHz* per channel
100kHz* per channel
100kHz* per channel
100kHz* per channel
Resolution
24-bit
24-bit
24-bit
16-bit
16-bit
Output Range
±2.5V,
±10V
±2.5V,
±10V
±2.5V,
±10V
±10V
±10V
Special Features
Isolation
500V
500V
500V
500V
500V
Digital I/O
24*
24*
16*
24*
24*
Counter/Timer
3*
3*
3*
3*
3*
Tachometer
∨*
∨*
∨*
∨*
∨*
Power
+5V
+5V
+5V
+5V
+5V
Available
Packaging
OEM,
Sleek Box
OEM
Sleek
Box
OEM,
Sleek Box
OEM,
Sleek Box
*All functions synchronized for high
speed.
Included Software:
Each DT9840 series module includes a CD containing device drivers, an API
library for developing DSP programs, an API communications library for
developing host programs, the DT Dynamic Signal Analyzer application, example
programs, and a number of utility programs : everything you need to get up and
running with a DT9840 Series module.
- DT9840 Series DSP Library : The DT9840 Series DSP Library provides
I/O and communication functions that you can call from a DSP application program
on a DT9840 Series module using Code Composer Studio from Texas
Instruments. - DT9840 Series Host Communication Library : The DT9840
Series Host Communication Library provides functions that you can call from a
host application program using Microsoft Visual Studio to allow communication
between the host and a DT9840 Series module. - DT9840 Series Download
Utility : The DT9840 Series Download Utility allows you to download a DSP
program (that conforms to the Code Composer Studio standard) into the SDRAM of a
DT9840 Series module, run the DSP program, and perform memory and LED tests on
the module. - DT9840 Series Flash Programmer Utility : The DT9840
Series Flash Programmer Utility allows you to download a DSP program (that
conforms to the Code Composer Studio standard) into the flash memory of a DT9840
Series module. - Example programs are provided that illustrate how to
call the functions in the DT9840 Series Host Communication Library and DT9840
Series DSP Library. - DT9841 Calibration Utility : The DT9841
Calibration Utility allows you to calibrate the analog I/O circuitry of a DT9841
or DT9841E module.
Additional Software:
- The free Dynamic Signal Analyzer application allows you to perform
dynamic signal processing operations on a DT9840 Series module without
programming. - Measure Foundry allows you to stream data from the
DT9840 series module without using Visual Studio or Code Composer. Measure
Foundry allows you to build complex test and measurement applications easily
without writing code.
EP342
0.1m shielded 50-pin cable for connecting multiple DT9837 or DT9840 Series
modules together.
EP348
Optional +5V power supply with cable. Included with Sleek Box enclosure.
EP354
Adapter to convert serial output to standard RS-232.
EP358E
Accessory panel for DT9841E. Features BNC connections for analog input and
output channels. Includes two EP344 cables.
Note: Some accessories are for Sleek Box models
only.
DT9842
The DT9842 is a scalable real-time USB data
acquisition module with an embedded DSP for fast control loop applications. This
DAQ modules features full data acquisition capability: eight 16-bit analog
inputs, two or eight 16-bit analog outputs, 24 lines of digital I/O, and three
32-bit counter timers.
Key Features:
- Successive-approximation A/D and D/A
converters for fast real-time response at up to 800 kS/s (aggregate) -
Real-time control with embedded TMS320C6713, 300 MHz DSP for stand-alone or
system operation - Software programmable DSP - Two packaging
configurations: Sleek Box version for easy connections or board-level version
for OEM-embedded applications - Flexible memory configuration in every
module: 128 MB SDRAM and 2 MB Flash allows autonomous operation - Scalable
design for connecting up to 4 modules for high-channel count applications -
High-speed host USB 2.0 host interface (480 Mbits/seconds) - 500 V Isolation
protects your computer
Item
Description
DT9842/2
USB DAQ Module; Board-level version
DT9842/2-SB
USB DAQ Module; Sleek Box enclosure
DT9842/8
USB DAQ Module; Board-level version
DT9842/8-SB
USB DAQ Module; Sleek Box enclosure
Accessories
EP333
Shielded cable (2m) with 37-pin connectors. Used to connect a DAQ
module or accessory panel to an STP37 screw terminal panel.
EP342
0.1m shielded 50-pin cable for connecting multiple DT9837 or DT9840
Series modules together.
EP348
Optional +5V power supply with cable. Included with Sleek Box models.
EP353
Accessory panel. Provides one 37-pin connector and one 26-pin
connector for attaching analog input signals.
EP354
Adapter to convert serial output to standard RS-232.
EP356
Accessory panel. Provides two 37-pin connectors for attaching analog
output, counter/timer, trigger, clock signals, or digital I/O signals.
EP360
2-meter shielded cable with two 37-pin connectors. Used to connect an
EP353 accessory panel to an STP37 screw terminal panel.
STP37
Screw terminal panel for connecting I/O signals. Requires EP333 cable
to connect STP37 with DAQ module or accessory panel.
Feature
DT9841
DT9841E
DT9841-VIB
DT9842/2
DT9842/8
Analog Input Features
Channels
8DI
2DI
8SE
8SE
8SE
Throughput
100kHz* per channel
100kHz* per channel
100kHz* per channel
100kHz* per channel
100kHz* per channel
Resolution
24-bit
24-bit
24-bit
16-bit
16-bit
Input Range
±10V
±10V
±10V
±10V
±10V
A/D Type
Delta-Sigma with DSP
Delta-Sigma with DSP
Delta-Sigma with DSP
SAR with
DSP
SAR with
DSP
Analog Output Features
Channels
2
2
2
2
2
Throughput
100kHz* per channel
100kHz* per channel
100kHz* per channel
100kHz* per channel
100kHz* per channel
Resolution
24-bit
24-bit
24-bit
16-bit
16-bit
Output Range
±2.5V,
±10V
±2.5V,
±10V
±2.5V,
±10V
±10V
±10V
Special Features
Isolation
500V
500V
500V
500V
500V
Digital I/O
24*
24*
16*
24*
24*
Counter/Timer
3*
3*
3*
3*
3*
Tachometer
∨*
∨*
∨*
∨*
∨*
Power
+5V
+5V
+5V
+5V
+5V
Available
Packaging
OEM,
Sleek Box
OEM
Sleek
Box
OEM,
Sleek Box
OEM,
Sleek Box
*All functions synchronized for high
speed.
Included Software:
Each DT9840 series module includes a CD containing device drivers, an API
library for developing DSP programs, an API communications library for
developing host programs, the DT Dynamic Signal Analyzer application, example
programs, and a number of utility programs : everything you need to get up and
running with a DT9840 Series module.
- DT9840 Series DSP Library : The DT9840 Series DSP Library provides
I/O and communication functions that you can call from a DSP application program
on a DT9840 Series module using Code Composer Studio from Texas
Instruments. - DT9840 Series Host Communication Library : The DT9840
Series Host Communication Library provides functions that you can call from a
host application program using Microsoft Visual Studio to allow communication
between the host and a DT9840 Series module. - DT9840 Series Download
Utility : The DT9840 Series Download Utility allows you to download a DSP
program (that conforms to the Code Composer Studio standard) into the SDRAM of a
DT9840 Series module, run the DSP program, and perform memory and LED tests on
the module. - DT9840 Series Flash Programmer Utility : The DT9840
Series Flash Programmer Utility allows you to download a DSP program (that
conforms to the Code Composer Studio standard) into the flash memory of a DT9840
Series module. - Example programs are provided that illustrate how to
call the functions in the DT9840 Series Host Communication Library and DT9840
Series DSP Library. - DT9841 Calibration Utility : The DT9841
Calibration Utility allows you to calibrate the analog I/O circuitry of a DT9841
or DT9841E module.
Additional Software:
- The free Dynamic Signal Analyzer application allows you to perform
dynamic signal processing operations on a DT9840 Series module without
programming. - Measure Foundry allows you to stream data from the
DT9840 series module without using Visual Studio or Code Composer. Measure
Foundry allows you to build complex test and measurement applications easily
without writing code.
EP333
2-meter shielded cable with two 37-pin connectors. Used to connect to an
STP37 screw terminal panel.
EP342
0.1m shielded 50-pin cable for connecting multiple DT9837 or DT9840 Series
modules together.
EP348
Optional +5V power supply with cable. Included with Sleek Box enclosure.
EP353
Accessory panel. Provides one 37-pin connector and one 26-pin connector for
attaching analog input signals.
EP354
Adapter to convert serial output to standard RS-232.
EP356
Accessory panel. Provides two 37-pin connectors for attaching analog output,
counter/timer, trigger, clock signals, or digital I/O signals.
EP360
2-meter shielded cable with two 37-pin connectors. Used to connect an EP353
accessory panel to an STP37 screw terminal panel.
STP37
Screw terminal panel for connecting I/O signals from the EP353 or EP356
accessory panel.
Note: Some accessories are for Sleek Box models
only.
상호: (주)인덱스티엠 I 주소: 16514, 경기도 수원시 영통구 법조로 25, 광교 SK VIEW Lake, A동 1602호 (내방객: 24층 회의실 사전예약) 사업자등록번호: 214-03-16174 I 대표자: 조인복 I 대표: 031-895-4370 Copyright @ 2000-2020 INDEXTM Corporation All Right Reserved 본 홈페이지의 무단복제를 불허함 INDEXTM Corporation A-1602, SK VIEW Lake Tower, 25, Beopjo-ro, Yeongtong-gu, Suwon-si, Gyeonggi-do, 16514, Korea.
