Simultaneous A/D operation with sampling rates up to 2.0 MHz per channel
All subsystems operate synchronously at 48 MHz.
2 or 4 analog inputs, 2 waveform analog outputs, 16 digital inputs, 16 digital outputs, 2 32-bit counter timers, and 3 quadrature decoders.
16-bit deglitched DAC’s run at 500 kS/s per channel for waveform generation.
True USB 2.0 host interface for transferring data at rates up to 480 Mbits/second.
500 V isolation provides low-noise measurements and protects PC.
Ships with DT-Open Layers device drives, Ready-to- measure applications, Measure Foundry evaluation, and much more.
Item
Description
DT9832-04-0-BNC
USB DAQ Module; 4 AI, 32 DIO, 2 C/T, 3 Q/D
DT9832-04-0-OEM
USB DAQ Module; 4 AI, 32 DIO, 2 C/T, 3 Q/D, board-only (OEM)
version
DT9832-04-2-BNC
USB DAQ Module; 4 AI, 2 AO, 32 DIO, 2 C/T, 3 Q/D
DT9832-04-2-OEM
USB DAQ Module; 4 AI, 2 AO, 32 DIO, 2 C/T, 3 Q/D, board-only (OEM)
version
DT9832A-02-0-BNC
USB DAQ Module; 2 AI, 32 DIO, 2 C/T, 3 Q/D
DT9832A-02-0-OEM
USB DAQ Module; 2 AI, 32 DIO, 2 C/T, 3 Q/D, board-only (OEM)
version
DT9832A-02-2-BNC
USB DAQ Module; 2 AI, 2 AO, 32 DIO, 2 C/T, 3 Q/D
DT9832A-02-2-OEM
USB DAQ Module; 2 AI, 2 AO, 32 DIO, 2 C/T, 3 Q/D, board-only (OEM)
version
Instant Delivery
Products available for Instant Delivery are in-stock and
ready-to-ship. Instant Delivery is available for online orders only. Order
quantities for Instant Delivery is limited to two pieces.
DT9832-04-2-BNC
USB DAQ Module; 4 AI, 2 AO, 32 DIO, 2 C/T, 3 Q/D
DT9832A-02-2-BNC
USB DAQ Module; 2 AI, 2 AO, 32 DIO, 2 C/T, 3 Q/D
Accessories
BNC DIN RAIL
KIT
DIN Rail Mounting Kit for USB DAQ modules with BNC enclosure.
EP333
Shielded cable (2m) with 37-pin connectors. Used to connect a DAQ
module or accessory panel to an STP37 screw terminal panel.
EP353
Accessory panel. Provides one 37-pin connector and one 26-pin
connector for attaching analog input signals.
EP355
Screw terminal panel for attaching analog I/O and digital I/O signals.
For OEM configurations only.
EP356
Accessory panel. Provides two 37-pin connectors for attaching analog
output, counter/timer, trigger, clock signals, or digital I/O signals.
EP360
2-meter shielded cable with two 37-pin connectors. Used to connect an
EP353 accessory panel to an STP37 screw terminal panel.
EP361
+5V power supply. Required for OEM configurations. Power supply is
included with BNC and STP configurations.
STP37
Screw terminal panel for connecting I/O signals. Requires EP333 cable
to connect STP37 with DAQ module or accessory panel.
DT9832-04-0
DT9832-04-2
DT9832A-02-0
DT9832A-02-2
Analog Input Features
Channels
4SE
2SE
Throughput
1.25MHz*
per channel
2.0MHz*
per channel
Resolution
16-bit
Input Range
±10V
A/D Type
SAR
Analog Output Features
Channels
-
2
-
2
Throughput
-
500kHz*
Waveform
-
500kHz*
Waveform
Resolution
-
16-bit
-
16-bit
Output Range
-
±10V
-
±10V
Special Features
Isolation
500V
Digital I/O
16 in, 16
out*
Counter/Timer
2*
Quad Decoder
3*
Tachometer
∨*
Power
+5V
Available
Packaging
BNC,
OEM
*All functions
synchronized for high speed.
The following software is compatible with this product:
Measure Foundry®
Measure Foundry is an open, powerful application builder for test and
measurement systems. Easily and quickly create complex applications without
writing code.
Measurement Applets
Measurement Applets are small applications created with Measure Foundry that
can be modified or combined to provide a specific solution. The objective is to
provide an avenue for our customers to quickly and easily design their own
applications.
quickDAQ
A ready-to-measure application for data acquisition. quickDAQ is a high
performance .NET based data collection and analysis software application that
allows you to acquire analog data, plot it during acquisition, analyze it, and
save it to disk for later analysis.
LV-Link
Lets you use Data Translation's USB and PCI data acquisition boards with
National Instruments' LabVIEW®
DAQ Adaptor for MATLAB
Access the powerful visualization and analysis capabilities of MATLAB® with
any Data Translation PCI or USB board or module. Data Translation's DAQ Adapter
provides and interface between the MATLAB Data Acquisition (DAQ) subsystem from
The MathWorks and Data Translation's DT-Open Layers architecture.
DT-Open Layers® for .NET
DT-Open Layers for .NET is a simple to use, yet powerful native .NET class
library for developing test and measurement applications in Microsoft Visual
Studio®.
Data Acquisition Omni CD
Collection of software, drivers, and utilities for Data Translation USB data
acquisition modules and PCI data acquisition boards. Includes DT-Open Layers for
.NET Class Library, DT-Display control, DT-Open Layers SDK and DTx-EZ. An
evaluation version of Measure Foundry and other ready-to-run applications are
included.
The following accessories are available for
this product:
BNC DIN RAIL KIT
Kit for mounting USB modules in BNC enclosure to a DIN rail. Includes
mounting clips, screws, and instructions. Rail not included.
EP333
2-meter shielded cable with two 37-pin connectors. Used to connect to an
STP37 screw terminal panel.
EP353
Accessory panel. Provides one 37-pin connector and one 26-pin connector for
attaching analog input signals.
EP355
Accessory panel. Provides two 37-pin connectors for attaching analog output,
counter/timer, trigger, clock signals, or digital I/O signals.
EP356
Accessory panel. Provides two 37-pin connectors for attaching analog output,
counter/timer, trigger, clock signals, or digital I/O signals.
EP360
2-meter shielded cable with two 37-pin connectors. Used to connect an EP353
accessory panel to an STP37 screw terminal panel.
EP361
Optional +5V power supply. Included with BNC configurations.
STP37
Screw terminal panel for connecting I/O signals from the EP353 or EP356
accessory panel.
상호: (주)인덱스티엠 I 주소: 16514, 경기도 수원시 영통구 법조로 25, 광교 SK VIEW Lake, A동 1602호 (내방객: 24층 회의실 사전예약) 사업자등록번호: 214-03-16174 I 대표자: 조인복 I 대표: 031-895-4370 Copyright @ 2000-2020 INDEXTM Corporation All Right Reserved 본 홈페이지의 무단복제를 불허함 INDEXTM Corporation A-1602, SK VIEW Lake Tower, 25, Beopjo-ro, Yeongtong-gu, Suwon-si, Gyeonggi-do, 16514, Korea.
