500 V 절연 PC 500 kHz에서 각각의 처리 속도와 0, 2, 또는 4 개의 아날로그 파형을 출력합니다.
16 개의 디지털 입력은, 아날로그 I / P를 샘플링 속도와 동기화할 수 있습니다.
16 개의 디지털 출력, 아날로그 오 / 피 샘플링 속도와 동기화할 수 있습니다.
2 카운터 / 타이머가 (32 비트), 아날로그 I / P를 샘플링 속도와 동기화할 수 있습니다.
세 구적법 디코더 입력의 x / y를 위치와 각도 회전을 확인합니다.
장거리 사용하기 위해 USB 케이블 extenders가 없습니다.
Item
Description
DT9836-6-0-BNC
USB DAQ Module; 6 AI, 32 DIO, 2 C/T, 3 Q/D
DT9836-6-0-OEM
USB DAQ Module; 6 AI, 32 DIO, 2 C/T, 3 Q/D
DT9836-6-2-BNC
USB DAQ Module; 6 AI, 2 AO, 32 DIO, 2 C/T, 3 Q/D
DT9836-6-2-OEM
USB DAQ Module; 6 AI, 2 AO, 32 DIO, 2 C/T, 3 Q/D
DT9836-6-4-OEM
USB DAQ Module; 6 AI, 4 AO, 32 DIO, 2 C/T, 3 Q/D
DT9836-12-0-BNC
USB DAQ Module; 12 AI, 32 DIO, 2 C/T, 3 Q/D
DT9836-12-0-OEM
USB DAQ Module; 12 AI, 32 DIO, 2 C/T, 3 Q/D
DT9836-12-2-BNC
USB DAQ Module; 12 AI, 2 AO, 32 DIO, 2 C/T, 3 Q/D
DT9836-12-2-OEM
USB DAQ Module; 12 AI, 2 AO, 32 DIO, 2 C/T, 3 Q/D
Instant Delivery
Products available for Instant Delivery are in-stock and ready-to-ship. Instant Delivery is available for online orders only. Order quantities for Instant Delivery is limited to two pieces.
DT9836-12-2-BNC-ID
USB DAQ Module; 12 AI, 2 AO, 32 DIO, 2 C/T, 3 Q/D
DT9836-12-2-OEM-ID
USB DAQ Module; 12 AI, 2 AO, 32 DIO, 2 C/T, 3 Q/D
Accessories
BNC DIN RAIL KIT
DIN Rail Mounting Kit for USB DAQ modules with BNC enclosure.
EP333
Shielded cable (2m) with 37-pin connectors. Used to connect a DAQ module or accessory panel to an STP37 screw terminal panel.
EP353
Accessory panel. Provides one 37-pin connector and one 26-pin connector for attaching analog input signals.
EP355
Screw terminal panel for attaching analog I/O and digital I/O signals. For OEM configurations only.
EP356
Accessory panel. Provides two 37-pin connectors for attaching analog output, counter/timer, trigger, clock signals, or digital I/O signals.
EP360
2-meter shielded cable with two 37-pin connectors. Used to connect an EP353 accessory panel to an STP37 screw terminal panel.
EP361
+5V power supply. Required for OEM configurations. Power supply is included with BNC and STP configurations.
STP37
Screw terminal panel for connecting I/O signals. Requires EP333 cable to connect STP37 with DAQ module or accessory panel.
Feature
DT9836-6-0
DT9836-6-2
DT9836-6-4
DT9836-12-0
DT9836-12-2
Analog Input Features
Channels
6SE
6SE
6SE
12SE
12SE
Throughput
225kHz* per channel
Resolution
16-bit
Input Range
±5V, ±10V
A/D Type
SAR
Analog Output Features
Channels
-
2
4
-
2
Throughput
-
500kHz* Waveform
500kHz* Waveform
-
500kHz* Waveform
Resolution
-
16-bit
16-bit
-
16-bit
Output Range
-
±10V
±10V
-
±10V
Special Features
Isolation
500V
Digital I/O
16 in, 16 out*
Counter/Timer
2*
Quad Decoder
3*
Power
+5V
Available Packaging
BNC, OEM
BNC, OEM
OEM
BNC, OEM
BNC, OEM
*All functions synchronized for high speed.
The following software is compatible with this product:
Measure Foundry®
Measure Foundry is an open, powerful application builder for test and measurement systems. Easily and quickly create complex applications without writing code.
Measurement Applets
Measurement Applets are small applications created with Measure Foundry that can be modified or combined to provide a specific solution. The objective is to provide an avenue for our customers to quickly and easily design their own applications.
quickDAQ
A ready-to-measure application for data acquisition. quickDAQ is a high performance .NET based data collection and analysis software application that allows you to acquire analog data, plot it during acquisition, analyze it, and save it to disk for later analysis.
LV-Link
Lets you use Data Translation's USB and PCI data acquisition boards with National Instruments' LabVIEW®
DAQ Adaptor for MATLAB
Access the powerful visualization and analysis capabilities of MATLAB® with any Data Translation PCI or USB board or module. Data Translation's DAQ Adapter provides and interface between the MATLAB Data Acquisition (DAQ) subsystem from The MathWorks and Data Translation's DT-Open Layers architecture.
DT-Open Layers® for .NET
DT-Open Layers for .NET is a simple to use, yet powerful native .NET class library for developing test and measurement applications in Microsoft Visual Studio®.
Data Acquisition Omni CD
Collection of software, drivers, and utilities for Data Translation USB data acquisition modules and PCI data acquisition boards. Includes DT-Open Layers for .NET Class Library, DT-Display control, DT-Open Layers SDK and DTx-EZ. An evaluation version of Measure Foundry and other ready-to-run applications are included.
The following accessories are available for this product:
BNC DIN RAIL KIT
Kit for mounting USB modules in BNC enclosure to a DIN rail. Includes mounting clips, screws, and instructions. Rail not included.
EP333
2-meter shielded cable with two 37-pin connectors. Used to connect to an STP37 screw terminal panel.
EP353
Accessory panel. Provides one 37-pin connector and one 26-pin connector for attaching analog input signals.
EP355
Accessory panel. Provides two 37-pin connectors for attaching analog output, counter/timer, trigger, clock signals, or digital I/O signals.
EP356
Accessory panel. Provides two 37-pin connectors for attaching analog output, counter/timer, trigger, clock signals, or digital I/O signals.
EP360
2-meter shielded cable with two 37-pin connectors. Used to connect an EP353 accessory panel to an STP37 screw terminal panel.
EP361
Optional +5V power supply. Included with BNC configurations.
STP37
Screw terminal panel for connecting I/O signals from the EP353 or EP356 accessory panel.
상호: (주)인덱스티엠 I 주소: 16514, 경기도 수원시 영통구 법조로 25, 광교 SK VIEW Lake, A동 1602호 (내방객: 24층 회의실 사전예약) 사업자등록번호: 214-03-16174 I 대표자: 조인복 I 대표: 031-895-4370 Copyright @ 2000-2020 INDEXTM Corporation All Right Reserved 본 홈페이지의 무단복제를 불허함 INDEXTM Corporation A-1602, SK VIEW Lake Tower, 25, Beopjo-ro, Yeongtong-gu, Suwon-si, Gyeonggi-do, 16514, Korea.
