인덱스티엠_센서응용 Data Logger 전문회사

MEASURpoint 열전대, RTD 또는 전압 입력의 모듈의 조합이 가능하며 매우 정확하고 정밀한 온도측정기입니다.
MEASURpoint은 커먼모드노이즈와 그라운드 루프 문제를 제거하여 신호노이즈에 대해 매우강하며 500V 절연을 제공합니다.
그것은 설정, 저장, 표시, 기록, 분석기능을 가진 QuickDAQ 응용 프로그램 소프트웨어가 포함되어 있습니다.

USB 인터페이스와 Ethenet 인터페이스 두종류에서 선택가능합니다.

Product	Channel-Channel Isolation	Analog Input	Resolution	Input Range	Direct Connect Sensor	Interface
DT8874	±500V	8-48 DI	24-bit	±75mV to ±400V	Thermocouples, RTDs, Voltage	Ethernet
DT9874	±500V	8-48 DI	24-bit	±75mV to ±400V	Thermocouples, RTDs, Voltage	USB

Key Features:

ISO-Channel™ technology provides ±500V galvanic isolation channel-to-channel and to earth ground
Dedicated 24-bit: Delta-Sigma ADC/ch
8DI to 48DI simultaneous analog inputs
Sampling rates: up to 10Hz/ch
Software selectable ranges on voltage boards of ±10V, ±100V, ±400V
Auto-calibrating front-end: resets the zero point on each power-up
Measurement Instrument Calibration Utility: allows in-field calibration
Digital I/O galvanically isolated to 250V: 8 in/8 out
Packaging options: compact, rugged 2U, half-rack enclosure

Thermocouple Input Features:

Voltage input range: ±75mV Dedicated CJC (cold junction compensation) input for each thermocouple channel
Supports B, E, J, K, N, R, S, and T thermocouple types
Break-detection circuitry: detect open thermocouple inputs

RTD Input Features:

Voltage input range: ±1.25V
4-wire, 3-wire, or 2-wire PT100, PT500, and PT1000 RTDs supported

Software Features:

QuickDAQ — Acquire and display from all Data Translation USB and Ethernet devices that support analog input streaming. Acquire data, record data to disk, display the results in both a plot and digital display, and read a recorded data file. Two additional options can be purchased to add FFT analysis capabilities to the base package. Also, data can be exported to other applications like Microsoft Excel® and MATLAB® for more advanced analysis
IVI-COM driver — works in any development environment that supports COM programming, including Visual Basic®, Visual C#® .NET, MATLAB®, VEE Pro, LabVIEW™ or LabWindow, and others
SCPI support — SCPI (Standard Commands for Programmable Instruments) is a universal programming language for electronic test and measurement instruments, based on the IEEE 488.1 and IEEE 488.2 standards